Farm & Ranch
[AgriLife Today] Beef influence on dairy cattle could improve marketing options, bottom line
By: Kay Ledbetter
Writer: Kay Ledbetter, 806-677-5608, skledbetter@ag.tamu.edu
Contact: Dr. Ted McCollum, 806-677-5600, ted.mccollum@ag.tamu.edu
AMARILLO – Dairy owners might be able to add more to their bottom line if they introduce a beef bull into their breeding program for some of the producing cows in their herd, a Texas A&M AgriLife Extension Service specialist said.
But just any bull from the sale barn won’t work, said Dr. Ted McCollum, AgriLife Extension beef cattle specialist in Amarillo, who spoke at the High Plains Dairy Conference recently in Amarillo.
“At today’s costs, dairy calves generally look at a $70 hickey because of inefficiency in the feedyard, and there are other value concerns relative to a beef calf,” McCollum said. “These costs and value concerns have to work back through the system to the dairy calf value.”
McCollum said a beef-on-dairy breeding program can add value to the calves from the dairy system grown for beef by improving growth and performance and overall carcass value. It also may reduce costs associated with losses from calving difficulty and stillbirths.
Some issues for dairy cattle in the beef market include lower gain, inferior feed efficiency, final weight/carcass weight that can be too light or heavy, lower red meat yield and dairy conformation discounts, he said.
With straight-bred Jersey-type cattle, one problem is light carcasses, McCollum said. Carcasses need to be over 625 pounds to avoid discounts. Some Holstein cattle, on the other hand, can be too large framed.
Limflex beef bulls were crossed with Jersey cows to increase the marketability of the traditional dairy calf. (Courtesy photo)
“Both can be issues at the packer,” he said.
Fed beef cattle will have higher carcass yield and red meat yield relative to dairy type cattle fed for the beef market, McCollum said. At similar live weights, dairy-type cattle yield lighter carcasses and the carcasses may yield less retail beef cuts than a beef animal.
“Beef cattle dress out at about 64 percent and dairy, at 61 or 62 percent or less,” he said. “You’re losing carcass weight. And again, these are factors that influence the value of dairy calves relative to beef calves.”
Another issue with dairy cattle going into the beef market is their conformation – what the carcass musculature looks like, McCollum said.
“They are simply light muscled and their ribeye is a different shape,” he said. “If you sell cattle on the grid, there is a discount on dairy conformation that has nothing to do with yield or quality grade.”
An Angus-Holstein cross will yield more beef than a straight Holstein calf raised for the beef market. (Courtesy photo)
Those are some issues that can be addressed and improved if a dairy owner will consider using a beef bull on a portion of their dairy cows, McCollum said.
“So what kind of bulls do you look for? Because of the combination of characteristics needed in a bull, you are not going to find the bull you need at the sale barn,” he said. “Select bulls to complement characters of the dairy breed. Find bulls of known genetic potential for birth weight, growth, muscling, carcass grade and weight, or work with an AI company with programs that offer beef sires targeted for use on dairy cows.”
Traits to look for are feeding performance – gain and efficiency, final weight, carcass weight, muscling, conformation and red meat yield, McCollum said. When considering sire selection for Jersey and Jersey-influenced cows, additional traits to consider are lower birth weight and accelerated growth. Sires to use on Holstein cows will vary from the desirable sires to use with Jersey and Jersey-type cows.
McCollum also addressed some questions about the use of sexed semen to produce bulls rather than heifers and market weight and timing for steers and heifers aimed at the feeder cattle market.
He said male calves always sell for more than females. The producer will need to compare the dollar difference for a steer and heifer and then make their determination on whether that difference is enough to offset the cost of using sexed semen.
“Currently on the light calf market, 400-500 pounds, there is a $10-20 per hundredweight differential, so $40-100 per head,” McCollum said. “So you have to determine if this justifies the added expense of sexed semen.”
As to the marketing, he said at the weights dairy calves typically leave calf ranches, there should be no concern about weight presented on the calf market. If the calves are held to heavier weights with intentions to market as feeder cattle, then heifers need to move at about 650-700 pounds and steers at 750-850 pounds.
-30-
Find more stories, photos, videos and audio at http://today.agrilife.org
Farm & Ranch
Grazing North Texas: Who’s Your Neighbor?
By Tony Dean, tonydean.tx1@gmail.com
Who qualifies as your neighbor? Webster says it is someone who lives nearby, but it isn’t always that simple. Is my neighbor the person next door, or someone in the next county? It could be both.
Our neighbors are an important part of life on the ranch and the grazing lands we share. Many of us find comfort in knowing another human being is somewhere in our neck of the woods, and that someone nearby cares what happens to us.
Being a good neighbor is part of being a productive and responsible rancher, so let’s look at some of the qualities that make a good one.
Protect your neighbor
Watch out for him.
The cattle business is dangerous. Almost everything we work with is bigger and faster than we are. A mad cow can turn an otherwise wonderful day into a disaster. Sooner or later, all of us will need some help.
The average age of today’s rancher keeps climbing. Be aware of your neighbors’ ages, limitations or disabilities, and keep an eye out for anything outside their normal routine.
More women own and operate ranches today, too. Some may suddenly find themselves responsible for parts of the operation that a spouse or family member used to handle. As neighbors, we can be a valuable backup system, helping one another learn, adjust and keep the operation moving.
And then there is wildfire. It can be on us in minutes. You may need to help move a family down the road to safety or move livestock out of harm’s way. Have a plan in mind before the emergency happens.
Be a friend
Some of us who live in the country drive to town for work or make regular trips for other reasons. Others are stay-at-home ranchers, and life can get a little lonely. A friendly smile, a phone call or an invitation to lunch can mean more than we realize.
Things aren’t always wine and roses at the ranch. Few occupations ask people to juggle such a mix of complex markets, weather, natural resource management, livestock management and countless other issues.
Spirits can get low. If we are listening, we can hear and feel the stress in someone’s life. On those days, you have a chance to be a special kind of friend.
Help your neighbor
Have you ever tried to load a trailer by yourself and needed someone to stand in the gate for a couple of minutes? All of us will need help at some point, and our neighbors should be among the people we can call.
Do your best to be there when needed, and your neighbors will likely be there when it is your turn to ask. Sometimes it will be a small job. Other times, it will be a big one. It doesn’t matter. We help our neighbors.
It’s also smart to make sure someone nearby knows your ranching program and understands the land you use. At some point, one of you may need to take care of business for the other for several days.
Be cooperative
There is no end to the situations that can involve more than one family. Fencing, road maintenance and livestock getting where they don’t belong are common ones.
If you don’t handle these things with a friendly, cooperative attitude, they can create problems between neighbors that last for years.
Good fences are something to be proud of. Nothing is gained by years of bickering. Reaching an agreement may be hard at times, but neighbors should be able to work things out. Clear your head, use common sense and come up with an answer everyone can live with.
If your cattle get mixed up with your neighbor’s, make it a priority to separate them as soon as possible. It is rude to let your cattle stay in your neighbor’s pasture eating his grass while you do nothing about it.
One good way to handle strays is for the rancher whose pasture they are in to pen his own cattle along with the strays. The other rancher can then load his cattle and take them home. Afterward, both ranchers can work together on any fence repairs.
By the way, a gate between neighbors is almost always a good policy.
Take ownership
The only way to avoid mistakes is to do nothing. But it isn’t in us as ranchers to sit around and watch the world go by. We are men and women of action, so things are going to go sideways from time to time.
When that happens, and it will, own your mistakes. Decisive action can prevent misunderstandings and make a problem go away much faster.
Be honest, and never, ever lie.
Be patient
We all have bad days. When your neighbor is a little grouchy, he or she probably has something weighing on them.
That is a chance to be a good neighbor. Be patient. Be a good listener. Help your neighbor through the turmoil if you can.
Respect property boundaries
Trespassing is wrong, illegal and rude. Never do it except in an emergency.
In the Southwest, where we live, land ownership is considered a sacred right, and it is a right available to anyone. With ownership comes an expectation of privacy and respect. When you trespass, you violate those rights.
And yes, it is trespassing when you cross a fence to fish or hunt without permission. Texas is a private-property state, which makes respecting these boundaries especially important.
That doesn’t mean you can’t have an understanding with your neighbors that lets you onto their land. Many good friends and neighbors work together on one another’s ranches, but both parties should always communicate well.
You have a cell phone. Use it any time you doubt whether you have the right to go through the gate. An invitation onto another person’s ranch is a privilege, so don’t abuse it.
Your word
Your word as a rancher, neighbor, man or woman helps define you in your community and throughout your life. Your neighbors want to trust you. They want to know that all they need from you is a handshake and that they can depend on what you say.
It is a blessing to live in North Texas, where people still respect and honor a life lived with truth and love.
A good life to live
Having good neighbors is a great way to live. It brings comfort and enjoyment to life. Sometimes it takes a little extra effort, but a friendly neighborhood, even one that covers many acres, is enjoyable and can help keep all of us safer.
It is worth the effort.
The Bible
The Bible has many references to being a good neighbor. Being a good neighbor was good judgment 2,000 years ago, and it is good judgment today. Jesus made it clear that love should guide a good neighbor.
Leviticus 19:18 tells us to love our neighbors as ourselves. That is a tall order. In Matthew 5:44, Jesus takes it further, telling us to love our enemies and pray for those who persecute us.
Our goal should always be to love one another, lift each other up, and help and protect our neighbors.
All of us face drought, floods, wildfire, tornadoes, low cattle prices, rattlesnakes and feral hogs, so let’s fight the fight together. Stand by your neighbor’s side, and he will stand by yours.
A North Texas minister was recently asked, “What do you do if you have a neighbor who is really hard to love?”
His answer was short and to the point: “Love him anyway.”
Farm & Ranch
Beyond Crude Protein
By NTFR Staff
A stack of hay may look good from the outside. The bales may be heavy, green and free of obvious weeds or mold. None of that tells a cattle producer what the hay will provide once it reaches the feed bunk.
Two bales from the same field can differ noticeably in nutrition if they were cut at different stages of maturity, weathered differently or stored under different conditions. The differences grow even larger when you compare hay bought from separate farms or produced in different growing seasons.
A forage analysis takes much of the guesswork out by showing what the hay contains and where you may need to supplement.
Crude protein is often the first number producers check, but it is only one part of the report. Energy, fiber, moisture and possible toxicity concerns can matter just as much when deciding whether a lot of hay suits dry cows, lactating cows, replacement heifers or growing calves.
Reading beyond the protein number
Most forage reports show results on both an “as received” and a dry-matter basis. The as-received column includes the water in the hay. The dry-matter column takes moisture out of the calculation so you can compare feeds with different moisture levels fairly.
For ration planning, the dry-matter values are usually the most useful. If you’re comparing dry hay with silage, cubes or another feed, make the comparison on a dry-matter basis rather than on the numbers as fed.
Moisture still deserves attention. Hay baled too wet is more likely to heat, mold or deteriorate in storage. In severe cases, heating can create a fire risk. Moisture also affects how many pounds of actual nutrients you are buying. A heavy bale isn’t necessarily a nutrient-dense bale if much of its weight is water.
Crude protein, usually listed as CP, estimates the protein in the forage based on its nitrogen content. Protein keeps the rumen microbes that help cattle digest forage working. When forage protein drops too low, intake and digestion may decline because those microbes can’t function as well.
The amount of protein a cow needs changes a great deal through the year. A mature, dry cow in mid-pregnancy needs less than a cow in late pregnancy or early lactation. Young, growing cattle and first-calf heifers may also need more protein than mature dry cows. Hay that is adequate for one group may fall short for another.
Always compare a forage report with the needs of the cattle that will eat the hay. Oklahoma State University notes that cattle requirements vary with weight, age, stage of production, desired gain and milk production. A single protein target can’t describe the needs of an entire herd.
Energy is another major piece of the feeding decision. Many forage reports express energy as total digestible nutrients, or TDN, an estimate of the digestible energy in the feed. Protein supports rumen function and tissue growth, while energy fuels maintenance, pregnancy, milk production and weight gain.
Hay can test well for protein and still come up short on energy. That matters most for cows nearing calving or producing milk. Low-energy hay may leave cattle feeling full without giving them enough nutrition to hold body condition. University of Nebraska Extension stresses evaluating both protein and energy when judging the feeding value of forage.
Fiber measurements help explain why cattle eat one hay readily and less of another. Neutral detergent fiber, or NDF, represents much of the plant’s structural material, including cellulose, hemicellulose and lignin. As NDF rises, cattle generally eat less because bulky, fibrous forage stays in the digestive tract longer.
Acid detergent fiber, or ADF, includes the least digestible parts of the plant. Higher ADF generally means lower digestibility and less available energy. Put simply, high NDF can limit how much cattle eat, and high ADF can mean they get less energy from what they do eat.
Both numbers tend to climb as forage plants mature. Mature hay usually has more stem and less leaf than hay cut earlier. It may still be acceptable feed for animals with lower needs, but it is less likely to support lactating cows or growing cattle without supplementation.
Some reports also include relative feed value, or RFV. This index uses ADF and NDF to compare forage quality, particularly for alfalfa and other legumes. It can help when you compare similar types of hay, but it doesn’t account for every nutrient cattle need. Don’t let RFV replace a closer look at crude protein, energy and the animal’s stage of production.
Depending on the lab package you choose, the report may include minerals. Labs commonly report calcium and phosphorus, but a forage analysis can’t replace a well-designed mineral program. Water quality, other feeds and interactions among minerals all affect mineral needs and availability. Work with an Extension specialist, veterinarian or livestock nutritionist before making major mineral changes.
Nitrate and prussic acid
A standard forage analysis may not include nitrates, and you often have to request that test separately. Nitrate testing is especially important for drought-stressed forage, heavily fertilized fields and crops such as sorghum, sudangrass, sorghum-sudan hybrids, millet, oats and some weeds.
Nitrate can remain in cured hay and doesn’t reliably disappear in storage. Test any hay you suspect of high nitrate before feeding it. Oklahoma State University recommends a laboratory analysis because field screening tests can show that nitrate is present but can’t measure how much.
Prussic acid is a different concern. Unlike nitrate, prussic acid usually dissipates as properly cured hay sits in storage, though suspect forage still needs careful management and professional guidance. Be sure which test you need, and don’t treat the terms nitrate and prussic acid as interchangeable.
Putting the numbers to work
A hay test pays off when it leads to a feeding plan. Once you have the results, you can match the hay to the right class of cattle. Save better hay for replacement heifers, thin cows, late-gestation cows or cows with calves at side. Feed lower-quality hay to mature dry cows with modest requirements.
Testing can also prevent unnecessary supplementation. Without an analysis, you may buy protein tubs, cubes or other supplements your cattle don’t need. The opposite mistake costs just as much. Assuming hay is better than it is can lead to lost body condition, lower milk production, poor breed-back rates and lighter calves.
Visual inspection still matters. Don’t ignore mold, foreign material, weeds, dust or heat damage because a lab report shows acceptable numbers. At the same time, color and appearance can’t reliably predict nutrient content. University of Nebraska notes that forage nutrient values vary widely, which makes average book values a poor substitute for testing the feed you have on hand.
A forage analysis won’t make poor hay better, but it can show you how to use that hay well. For the cost of a test, you get information that can guide hay purchases, cut supplement waste and put each lot of hay where it will do the most good.
The protein number may get the most attention, but it doesn’t tell the whole story. Understanding moisture, TDN, NDF, ADF and potential toxicity gives you a much clearer picture of what is inside the bale.
Farm & Ranch
Don’t Be Caught Off Guard
By Savannah Magoteaux
A September rain can be exactly what a North Texas pasture needs, but that flush of green can bring an unwelcome guest.
Fall armyworms are a familiar late-summer and early-fall pest across Texas, and they can do serious damage to pastures and hay fields when conditions are right. Bermudagrass is a common target, but armyworms also feed on small grains, ryegrass and other forage crops. The key is catching them early, before a manageable infestation turns into a field that seems to disappear overnight.
Despite the name, fall armyworms are caterpillars. The adult moths migrate into Texas and lay masses of eggs on grasses, fence posts, buildings and other surfaces. Once the larvae hatch, they start feeding on plants.
Young armyworms are small and hard to spot unless you are actively scouting. As they grow, their appetite climbs. Larger larvae can strip leaves fast, leaving stems behind and cutting into available forage or hay yield.
Look for an inverted, light-colored “Y” on the caterpillar’s head. Mature larvae can reach about 1½ inches long and often have several dark and light stripes running the length of the body.
Armyworms feed most actively during the cooler parts of the day, so early morning and late afternoon are good times to scout. Walk through several areas of the pasture rather than checking only along the edge. Look closely near the soil surface and beneath grass leaves, especially where you see fresh feeding damage.
Scouting matters most after rain or irrigation. New grass growth draws newly hatched larvae, and populations can build quickly when conditions favor them.
Texas A&M AgriLife Extension generally recommends considering treatment in improved pastures when you find about three or more armyworms per square foot. The decision should also weigh the size of the larvae, how much forage is present, the expected hay value and how severe the damage is.
Timing matters. Small armyworms are easier to control than large ones, and an insecticide does less good once the caterpillars are nearly mature and have already eaten much of the forage. If you treat, follow the product label carefully, including grazing and hay-harvest restrictions.
Don’t assume one treatment or one scouting trip will carry a pasture through the season. Fall armyworm moths can keep moving into an area, laying more eggs and starting another generation of larvae. Keep checking fields even after you have controlled an infestation.
For hay producers, an approaching harvest date can also shape the decision. When the crop is close to harvest, cutting the field may be a better option than spraying. The best choice depends on the number and size of the armyworms, how much forage remains and whether the weather allows you to cut hay.
September rain is usually welcome across North Texas, especially after a long, hot summer. Just remember that fresh green grass deserves a closer look. A few minutes of scouting can make the difference between catching fall armyworms early and finding the damage after they have eaten their fill.
-
Country Lifestyles4 years agoScott & Stacey Schumacher: A Growth Mindset
-
Country Lifestyles10 years agoStyle Your Profile – What your style cowboy hat says about you and new trends in 2017
-
Horsefeathers12 years agoMount Scott: Country Humor with David Gregory
-
Country Lifestyles10 years agoJune 2016 Profile – The man behind the mic: Bob Tallman
-
Outdoor11 years agoButtercup or Primrose?
-
Country Lifestyles10 years agoDecember 2016 Profile, Rusty Riddle – The Riddle Way
-
HOME10 years agoGrazing North Texas – Wilman Lovegrass
-
The Natural Horseman9 years agoThis is why we do what we do — RayeAnn and Cisco




